IS 4031 / IS 269
Complete physical testing of OPC, PPC, and PSC hydraulic cement for compressive strength and setting properties.
IS 1727 / IS 3812
Physical qualification of pozzolanic pulverized fuel ash used in concrete batching and cement blending.
IS 15388 / ASTM C1240
High-reactivity micro silica physical verification for ultra-high performance concrete mixes.
IS 16714
Physical testing of GGBS for marine concrete and low-heat durable mass concrete structures.
IS 2386 / IS 383
Mechanical characterization of crushed stone metal (10mm, 20mm, 40mm) for structural concrete and road bases.
IS 2386 / IS 383
Gradation, fineness modulus, and silt content determination for crushed M-sand and natural river sand.
IS 13630 / IS 15622
Physical and flexural strength testing for glazed ceramic floor and wall tiles.
IS 3495 / IS 1077
Comprehensive mechanical quality testing for burnt clay red bricks used in structural masonry.
IS 12894 / IS 3495
Compressive strength and water absorption testing for pulverized fuel ash lime bricks.
IS 14268 / IS 6006
High capacity tension and relaxation testing for 7-ply unbonded and bonded prestressed concrete PC strands.
IS 2062 / IS 1599
Tensile and bend evaluation for hot-rolled structural steel plates, angles, channels, and I-beams.
IS 1161 / IS 1239
Tensile, flattening, and bend testing for circular steel tubes used in structural scaffolding and piping.
IS 280
Tensile strength and wrapping ductility testing for annealed steel binding wires.
IS 4923 / IS 1161
Mechanical properties and dimensional tolerances verification for structural hollow steel sections (SHS/RHS).
IS 6603 / ASTM A276
UTM tensile and elongation testing for austenitic stainless steel bars and wire rods.
ASTM C1107 / IS 2770
Compressive strength, flowability, and expansion testing for non-shrink cementitious precision grouts.
ASTM C579 / ASTM C580
Compressive and flexural strength testing for resin-based heavy machinery foundation epoxy grouts.
IS 13620 / ASTM A775
Coating thickness, flexibility, and holiday flaw testing for fusion-bonded epoxy coated rebar.
IS 516 / IS 456
Compressive and flexural strength evaluation of cast concrete cubes, cylinders, and extracted drilled cores.
IS 2185 Part 3
Oven-dry density and compressive strength testing for Autoclaved Aerated Concrete masonry blocks.
IS 2185 Part 1 & 2
Compressive strength, block density, and water absorption testing for precast hollow and solid concrete masonry blocks.
IS 15658
Compressive strength, water absorption, and abrasion resistance testing for precast concrete paver blocks.
IS 1786 / IS 1608
UTM tension and mandrel bend testing for high-strength deformed Fe 500/550/600 D TMT reinforcement bars.
IS 16172
Static tensile, cyclic tension-compression, and total slip testing for mechanical rebar couplers.
IS 2720
Laboratory soil physical classification, grain size analysis, Atterberg limits, and subgrade strength tests.
IS 9143 / IS 8764
Unconfined compressive strength (UCS), point load strength index, and slake durability testing for bedrock core samples.
IS 2547
Setting time, compressive strength, and soundness testing for gypsum wall plasters.
IS 2250 / IS 1542
Compressive strength, water retention, and consistency testing for factory premixed masonry plasters and mortars.
IS 1542 / ASTM C270
Tensile adhesion and compressive strength testing for thin-bed block jointing adhesive mortars.
IS 15477 / EN 12004
Tensile adhesion pull-off strength and shear adhesion strength testing for polymer-modified tile adhesives (Type 1 to Type 4).
Contact our laboratory team today for sample pick-up, quotation, or technical consultation across all 30 mechanical scope materials.
CONTACT FOR BOOKING A TEST →