rdssqualitycontrollabpvtltd@gmail.com Phone: +91 8976639318 / 9802816434 / 8418064616
RDSS Logo
Book Test
Home › Services Catalog › Concrete Mix Design
CONCRETE MIX DESIGN SERVICE

CONCRETE MIX DESIGN

NABL accredited concrete mix proportioning services in accordance with IS 10262 and IRC 44: High Performance Concrete, Normal Mix Design upto M50, Self-Compaction Concrete, Color Concrete, Light Weight Concrete, and PQC Mix Design.

CONCRETE MIX DESIGN SERVICE

CONCRETE MIX DESIGN

High Performance Concrete Mix Design IS 10262 / IRC 112

1. High Performance Concrete Mix Design

Advanced trial mix designs incorporating micro silica, GGBS, fly ash, and PCE superplasticizers for high-rise towers, heavy bridges, and extreme durability environments.

  • Target Strength Grades M60, M70, M80, M90 & M100
  • Triple-Blend Cementitious Material Optimization
  • Ultra-Low Water-Binder Ratio (w/b ≤ 0.30)
  • Heat of Hydration & Durability Parameter Verification
BOOK HPC MIX DESIGN →
Normal Mix Design upto M50 Grade IS 10262 / IS 456

2. Normal Mix Design upto M50 Grade

Economical trial batching for standard commercial buildings, residential foundations, retaining walls, columns, and slabs.

  • Reinforced Concrete Grades M10 to M50
  • Cement Consumption Optimization & Grading Balance
  • Slump Retention at 30, 60 & 120 Minutes for RMC Pumping
  • Trial Batching & 7 / 28 Day Compressive Strength Curves
BOOK NORMAL MIX DESIGN →
Self-Compaction Concrete Mix Design IS 10262 ANNEX A / EFNARC

3. Self-Compaction Concrete Mix Design

Flowable mix proportioning requiring zero external vibration, tailored for heavily congested rebar sections and fair-faced architectural forms.

  • Slump Flow & T500 Spread Time Measurement
  • V-Funnel Flow Time & Viscosity Optimization
  • L-Box & U-Box Passing Ability through Congested Rebar
  • J-Ring & Sieve Segregation Resistance Verification
BOOK SCC MIX DESIGN →
Color Concrete Mix Design IS 10262 / ASTM C979

4. Color Concrete Mix Design

Specialized architectural mix proportioning incorporating synthetic mineral oxide pigments, white cement, and UV-stable admixtures for stamped decorative pavements and architectural facades.

  • ASTM C979 Mineral Oxide Pigment Compatibility & Dispersion
  • Color Consistency & Batch-to-Batch Uniformity Control
  • UV Stability & Efflorescence Resistance Treatment
  • Stamped, Polished & Exposed Aggregate Textural Finishes
BOOK COLOR MIX DESIGN →
Light Weight Concrete Mix Design IS 10262 / IS 2185 Part 4

5. Light Weight Concrete Mix Design

Structural and non-structural lightweight concrete mix proportioning using lightweight aggregates or cellular foaming agents for dead-load reduction and thermal insulation.

  • Controlled Density Range (600 kg/m³ to 1800 kg/m³)
  • Significant Structural Dead Load Reduction for High-Rises
  • Superior Thermal Insulation & Acoustic Attenuation
  • Structural Lightweight Aggregate Concrete (SLWAC) Verification
BOOK LIGHTWEIGHT MIX →
PQC Mix Design IRC 44 / IS 10262

6. PQC Mix Design

Heavy-duty Pavement Quality Concrete (PQC) and Dry Lean Concrete (DLC) mix design for expressways, highways, container yards, and airport runways.

  • Flexural Strength Target (4.5 MPa to 5.5 MPa)
  • Dry Lean Concrete (DLC) Sub-base Trial Mixes
  • Slipform Paver Workability & Air Content Optimization
  • Resistance to Heavy Wheel Loads, Abrasion & Dynamic Impact
BOOK PQC MIX DESIGN →
SITE BATCHING & PLACEMENT

CONCRETE MIX DESIGN FIELD VALIDATION

On-site workability verification, slump retention monitoring, and trial pour validation by RDSS quality control engineers.

Concrete Mix Placement Discharge

Concrete Transit Mixer Chute Discharge & Quality Control

Direct on-site placement, slump testing, and fresh concrete sampling for strength compliance.

NEED A CERTIFIED CONCRETE MIX DESIGN FOR YOUR SITE?

Send us your raw material samples (cement, aggregates, admixtures) to initiate laboratory trial mix proportioning.

CONTACT FOR BOOKING A TEST →